Path Lights vs. Post-Top Lights for Long Commercial Walkways
Path lights fit some narrow, open routes, while post-top lights may suit wider or obstructed areas. Use a mixed layout only when walkway segments have materially different needs, then verify visibility, glare, clear-route, and...
Read guide
Comprehensive Guides
Explore practical guides, buying advice, and product education from the Hyperlite team.
Featured Guide
Start here
Path Lights vs. Post-Top Lights for Long Commercial Walkways
Path lights fit some narrow, open routes, while post-top lights may suit wider or obstructed areas. Use a mixed layout only when walkway segments have materially different needs, then verify visibility, glare, clear-route, and...
Read guide
Latest Articles
Latest guides
Mixed-Ceiling Warehouse Lighting: Build Separate Design Zones
Mixed-height warehouses usually need separate lighting zones when mounting conditions, rack geometry, tasks, access, or installation constraints change the layout assumptions. This guide shows...
Portable vs. Fixed Work Lighting for Maintenance Crews
Portable work lights fit changing work zones and inspection angles, fixed fixtures fit stable recurring coverage, and mixed lighting handles a stable area with...
Commercial Lighting Pilot Scorecard: Test More Than Brightness
Use a qualitative commercial lighting pilot scorecard to evaluate more than brightness. Record task results, distribution, comfort, feedback, controls, maintenance, operating conditions, corrective-action owners,...
Small Commercial Entry Canopy Lighting: Plan the Transition Zone
Plan small commercial entry canopy lights around the door-to-approach transition zone. This guide helps you map coverage, compare canopy-mounted and wall-mounted arrangements, control glare,...
Panel vs. Linear Fixtures for Customer-Facing Work Areas
Choose panel fixtures for broad shared coverage, linear fixtures for elongated task lines, and a mixed layout only when the plan shows two distinct...
Outdoor Light Flicker After Rain or Temperature Changes: Safe Checks
Outdoor light flicker after rain or temperature changes may point toward moisture exposure, a control transition, a fixture-level issue, or a shared electrical condition....
Commercial Lighting Ownership Cost: Add Access, Downtime, and Commissioning
A practical commercial lighting ownership-cost worksheet for comparing quotes on the same base case while separating access, downtime, maintenance, commissioning, and future expansion assumptions.
Lighting Project Brief: Organize Photos and Measurements for Design Support
A practical commercial lighting project brief should connect each zone's dimensions, heights, fixed points, labeled photos, existing fixtures and controls, task conditions, exposure, desired...
Storage or Inspection: Decide Whether One Lighting Layout Can Serve Both
One warehouse lighting layout can serve storage and inspection only when representative task positions have comparable viewing conditions. This guide shows when to keep...
Parking Lot Retrofit: When New Distribution Matters More Than One-for-One Replacement
A practical decision guide for parking lot retrofits that keeps existing poles in place while distinguishing verified one-for-one replacement from optical redesign and photometric...
When a Lighting Layout Misses the Work Surface: Check the Task Plane
A floor average can look acceptable while the surface workers read, handle, or inspect remains dim because the layout measured a different plane. This...
Under-Vehicle Repair Lighting: Portable Work Light or Fixed Fixture?
Portable lighting usually fits changing under-vehicle work points, fixed lighting fits a persistently dim stationary bay, and a combined setup works when both problems...
Lighting Substitutions: Review Mounting Changes Before Approval
A practical review path for commercial lighting substitutions that change hook, chain, pendant, surface, or bracket mounting. Compare the specified and proposed interfaces, assemble...
Outdoor Lighting by Zone: Match Fixtures to Commercial Property Needs
Use a property map to assign outdoor lights by zone, then test each fixture role against coverage, mounting, glare, spill light, power, and maintenance...
Warehouse Sensor Dimming: Test Visibility Before Low Output Becomes a Problem
Test warehouse lighting in full-output, standby, re-entry, and override at the same floor and vertical task surfaces. The failing state, affected surface, and single-fixture...