Warehouse Picking and Packing Lighting: Separate Task Zones from Aisles
Picking, packing, receiving, staging, and storage aisles should not automatically share one warehouse lighting layout. Classify each zone by its visual task and primary surface, then review rack geometry, mounting height, obstructions, and worker...
Read guide
Comprehensive Guides
Explore practical guides, buying advice, and product education from the Hyperlite team.
Featured Guide
Start here
Warehouse Picking and Packing Lighting: Separate Task Zones from Aisles
Picking, packing, receiving, staging, and storage aisles should not automatically share one warehouse lighting layout. Classify each zone by its visual task and primary surface, then review rack geometry, mounting height, obstructions, and worker...
Read guide
Latest Articles
Latest guides
Vapor-Tight or Standard Linear Fixtures for Washdown Areas?
Vapor-tight lights deserve consideration when a space repeatedly faces condensation, dust, spray, moisture, or frequent cleaning. A standard linear fixture may still work in...
What to Measure Before Requesting a Commercial Lighting Layout
Before requesting a commercial lighting layout, collect zone dimensions, ceiling and mounting details, existing fixture locations, activity height when relevant, obstructions, operating conditions, and...
Parking Lot Lighting: Fix Bright Spots Without Losing Edge Coverage
Bright pools beneath parking lot fixtures with dark areas between poles usually point to a distribution, aiming, overlap, mounting, obstruction, or layout question—not automatically...
Commercial Lighting Maintenance: An Inspection-to-Action Checklist
A working fixture can still create dim areas, glare, uneven coverage, or timing problems. This commercial lighting maintenance checklist helps facility teams inspect visible...
Wall Pack or Flood Light for a Building Corner? Start With the Coverage Shape
A wall pack is a practical starting point for a primarily wall-mounted perimeter, while an LED flood light deserves inspection when adjustable aiming toward...
Repeated Commercial Light Failures: Repair, Replace, or Redesign?
Repeated commercial light failures need pattern-based triage, not automatic one-for-one replacement. Compare failure scope, timing, controls, installation, environment, and maintenance records before deciding whether...
A Task-Based Lighting Plan for a Multi-Use Garage
A practical garage lighting plan starts with tasks, not fixture types. Map parking, access, work, inspection, storage, fitness, and specialty zones; assign ambient, task,...
Loading Dock Lighting: Plan for Trailer and Threshold Visibility
Loading dock lighting works best as a zone-specific plan—not one uniform warehouse layer. Separate the dock floor, trailer interior, apron, and threshold; then match...
Bench Lighting for Small Parts: Control Shadows and Sight Lines
Effective bench lighting starts with the relationship between the worker, light source, tools, and part—not brightness alone. This guide explains how to separate ambient,...
Five Compatibility Checks Before Mixing LED Fixtures and Controls
Before mixing LED fixtures and lighting controls, compare five interfaces: fixture and driver requirements, signal and dimming method, voltage and load limits, shared-zone behavior,...
When a Lumens Estimate Is Not Enough for a Lighting Layout
A lumens-per-square-foot estimate can start a commercial lighting conversation, but it cannot confirm final placement or coverage. Use this condition-based guide to decide when...
Property-Line Glare From Outdoor Lights: Find the Fix
Property-line glare is usually a geometry problem before it is a brightness problem. Trace the light from the affected viewing position to its source,...
Bright Floors, Dark Rack Faces: Diagnose Warehouse Visibility
A bright warehouse floor does not prove that labels, pallet faces, or upper shelves are visible. This guide separates horizontal from vertical illumination, explains...
Should You Repair One Failed Fixture or Rethink the Whole Lighting Layout?
One failed fixture can begin as a local maintenance issue. Repeated, clustered, synchronized, or space-level symptoms call for broader evidence collection before you repair,...
Garage Lighting for 3D Printing and Maker Workshops
Maker garages need task-first lighting that supports 3D printing inspection, woodworking accuracy, and brewing cleanup. This guide compares fixture types, placement, and buyer checks.